How to Fix a Broken Dryer Knob Shaft

Is your dryer’s knob stuck or loose? Don’t worry, it’s a common problem that can often be fixed with a few simple steps. Here are a few reasons why a dryer knob shaft may break:

Image: machineanswered.com

1. Overuse: Excessive use of the knob can weaken the shaft over time, leading to breakage.
2. Wear and Tear: Continuous use of the dryer can cause natural wear and tear on the knob shaft.
3. External Force: Knobs can get bumped or knocked accidentally, causing the shaft to snap.
4. Manufacturing Defect: In rare cases, a manufacturing defect may result in weak shafts.

Whether it’s due to wear and tear or an accidental impact, this guide will provide you with a simple yet effective method to fix a broken dryer knob shaft in no time.

Materials You’ll Need:

• New dryer knob shaft (can be purchased online or from a hardware store)
• Small screwdriver
• Pliers
• Safety glasses

Step-by-Step Guide:

1. Safety First: Before you start, make sure to disconnect your dryer from the power source and put on safety glasses to protect your eyes from any debris.

2. Removal of the Knob and Control Panel: Locate the screw holding the knob in place and remove it using a small screwdriver. Once the knob is off, you’ll need to remove the control panel. This is usually held in place by a few screws as well.

3. Disconnecting Old Shaft: Use pliers to gently pull the knob’s shaft away from the control panel. Note how it is placed inside for reference later.

4. Installing the New Shaft: Take the new dryer knob shaft and slide it into place in the control panel, aligning it with the knob’s hole. Push gently to ensure it’s seated correctly.

5. Securing the Shaft: Use pliers to bend the tabs around the shaft so that it holds securely. Ensure it’s tight enough to prevent the knob from coming loose but not so tight that it can’t rotate freely.

6. Reattaching the Knob: Take the dryer knob and slide it onto the newly installed shaft. Align it correctly and secure it with the screw you removed earlier.

7. Reattach Control Panel and Plug Back In: Once the knob is back in place, reattach the control panel, making sure all screws are tightened. Plug the dryer back into the power source and test the knob.

Additional Tips:

• If your dryer is still under warranty, contact the manufacturer as they may repair or replace the knob shaft for free.

• When buying a replacement knob shaft, make sure it’s compatible with your dryer model.

• If you’re not confident in making the repair yourself, don’t hesitate to call a qualified appliance technician.

Fixing a broken dryer knob shaft is relatively simple and can save you the cost of professional repair or a new dryer. Remember, safety is paramount, so always wear safety glasses and disconnect the dryer before you begin.

Image: removeandreplace.com

How To Fix Broken Dryer Knob Shaft