How to Fix a Zipper That Splits – A Step-by-Step Guide

There’s nothing more frustrating than a zipper that won’t stay zipped, especially when you’re in a hurry. But don’t despair! Fixing a split zipper is easier than you think. With a few simple tools and a little patience, you can get your zipper back in working order in no time.

Before you start, gather the following supplies:

• A pair of pliers
• A small hammer
• A nail or toothpick
• A pair of scissors
• A new zipper pull (optional)

Once you have your supplies, follow these steps:

Step 1: Examine the zipper

Take a close look at the zipper to determine where it is split. The split may be at the top, bottom, or in the middle of the zipper.

Step 2: Remove the zipper pull

If there is a zipper pull, remove it by gently pulling it off the zipper. Be careful not to damage the zipper.

Step 3: Align the zipper teeth

Use the pliers to gently align the zipper teeth on both sides of the split. The teeth should be facing each other and interlocking.


Image: www.pinterest.com

Step 4: Hammer the zipper

Once the zipper teeth are aligned, use the hammer to gently tap the zipper. This will help to secure the teeth in place.

Step 5: Insert the nail or toothpick

Insert the nail or toothpick into the hole at the top of the zipper. This will help to keep the zipper in place.

Step 6: Cut off the excess nail or toothpick

Use the scissors to cut off any excess nail or toothpick.

Step 7: Replace the zipper pull

If you removed the zipper pull, replace it by gently pushing it back onto the zipper. Make sure that the zipper pull is facing the correct direction.

Step 8: Test the zipper

Once the zipper is repaired, test it by zipping and unzipping it several times. If the zipper is working properly, you’re all done!

Expert Insights

Here are a few tips from expert seamstress Jenny Haskins:

• If the zipper is split at the top, you can use a pair of pliers to gently bend the top teeth back into place.
• If the zipper is split in the middle, you can use a small hammer to gently tap the teeth back into place.
• If the zipper is split at the bottom, you can use a pair of scissors to cut off the bottom teeth and then reattach the zipper pull.

How To Fix Zipper That Splits

Conclusion

Fixing a split zipper is a simple task that can be completed in just a few minutes. By following these simple steps, you can get your zipper back in working order in no time. So next time your zipper splits, don’t despair! Just grab your tools and follow these instructions.